[ACCEPTED]-How do I do base64 encoding on iOS?-base64

This is a good use case for Objective C 1 categories.

For Base64 encoding:

#import <Foundation/NSString.h>

@interface NSString (NSStringAdditions)

+ (NSString *) base64StringFromData:(NSData *)data length:(int)length;

@end

-------------------------------------------

#import "NSStringAdditions.h"

static char base64EncodingTable[64] = {
  'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P',
  'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z', 'a', 'b', 'c', 'd', 'e', 'f',
  'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v',
  'w', 'x', 'y', 'z', '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', '+', '/'
};

@implementation NSString (NSStringAdditions)

+ (NSString *) base64StringFromData: (NSData *)data length: (int)length {
  unsigned long ixtext, lentext;
  long ctremaining;
  unsigned char input[3], output[4];
  short i, charsonline = 0, ctcopy;
  const unsigned char *raw;
  NSMutableString *result;

  lentext = [data length]; 
  if (lentext < 1)
    return @"";
  result = [NSMutableString stringWithCapacity: lentext];
  raw = [data bytes];
  ixtext = 0; 

  while (true) {
    ctremaining = lentext - ixtext;
    if (ctremaining <= 0) 
       break;        
    for (i = 0; i < 3; i++) { 
       unsigned long ix = ixtext + i;
       if (ix < lentext)
          input[i] = raw[ix];
       else
  input[i] = 0;
  }
  output[0] = (input[0] & 0xFC) >> 2;
  output[1] = ((input[0] & 0x03) << 4) | ((input[1] & 0xF0) >> 4);
  output[2] = ((input[1] & 0x0F) << 2) | ((input[2] & 0xC0) >> 6);
  output[3] = input[2] & 0x3F;
  ctcopy = 4;
  switch (ctremaining) {
    case 1: 
      ctcopy = 2; 
      break;
    case 2: 
      ctcopy = 3; 
      break;
  }

  for (i = 0; i < ctcopy; i++)
     [result appendString: [NSString stringWithFormat: @"%c", base64EncodingTable[output[i]]]];

  for (i = ctcopy; i < 4; i++)
     [result appendString: @"="];

  ixtext += 3;
  charsonline += 4;

  if ((length > 0) && (charsonline >= length))
    charsonline = 0;
  }     
  return result;
}

@end

For Base64 decoding:

#import <Foundation/Foundation.h>

@class NSString;

@interface NSData (NSDataAdditions)

+ (NSData *) base64DataFromString:(NSString *)string;

@end

-------------------------------------------

#import "NSDataAdditions.h"

@implementation NSData (NSDataAdditions)

+ (NSData *)base64DataFromString: (NSString *)string
{
    unsigned long ixtext, lentext;
    unsigned char ch, inbuf[4], outbuf[3];
    short i, ixinbuf;
    Boolean flignore, flendtext = false;
    const unsigned char *tempcstring;
    NSMutableData *theData;

    if (string == nil)
    {
        return [NSData data];
    }

    ixtext = 0;

    tempcstring = (const unsigned char *)[string UTF8String];

    lentext = [string length];

    theData = [NSMutableData dataWithCapacity: lentext];

    ixinbuf = 0;

    while (true)
    {
        if (ixtext >= lentext)
        {
            break;
        }

        ch = tempcstring [ixtext++];

        flignore = false;

        if ((ch >= 'A') && (ch <= 'Z'))
        {
            ch = ch - 'A';
        }
        else if ((ch >= 'a') && (ch <= 'z'))
        {
            ch = ch - 'a' + 26;
        }
        else if ((ch >= '0') && (ch <= '9'))
        {
            ch = ch - '0' + 52;
        }
        else if (ch == '+')
        {
            ch = 62;
        }
        else if (ch == '=')
        {
            flendtext = true;
        }
        else if (ch == '/')
        {
            ch = 63;
        }
        else
        {
            flignore = true; 
        }

        if (!flignore)
        {
            short ctcharsinbuf = 3;
            Boolean flbreak = false;

            if (flendtext)
            {
                if (ixinbuf == 0)
                {
                    break;
                }

                if ((ixinbuf == 1) || (ixinbuf == 2))
                {
                    ctcharsinbuf = 1;
                }
                else
                {
                    ctcharsinbuf = 2;
                }

                ixinbuf = 3;

                flbreak = true;
            }

            inbuf [ixinbuf++] = ch;

            if (ixinbuf == 4)
            {
                ixinbuf = 0;

                outbuf[0] = (inbuf[0] << 2) | ((inbuf[1] & 0x30) >> 4);
                outbuf[1] = ((inbuf[1] & 0x0F) << 4) | ((inbuf[2] & 0x3C) >> 2);
                outbuf[2] = ((inbuf[2] & 0x03) << 6) | (inbuf[3] & 0x3F);

                for (i = 0; i < ctcharsinbuf; i++)
                {
                    [theData appendBytes: &outbuf[i] length: 1];
                }
            }

            if (flbreak)
            {
                break;
            }
        }
    }

    return theData;
}

    @end

A really, really fast implementation which 10 was ported (and modified/improved) from 9 the PHP Core library into native Objective-C 8 code is available in the QSStrings Class from the QSUtilities Library. I 7 did a quick benchmark: a 5.3MB image (JPEG) file 6 took < 50ms to encode, and about 140ms 5 to decode.

The code for the entire library 4 (including the Base64 Methods) are available 3 on GitHub.

Or alternatively, if you want the code 2 to just the Base64 methods themselves, I've 1 posted it here:

First, you need the mapping tables:

static const char _base64EncodingTable[64] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
static const short _base64DecodingTable[256] = {
    -2, -2, -2, -2, -2, -2, -2, -2, -2, -1, -1, -2, -1, -1, -2, -2,
    -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2,
    -1, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, 62, -2, -2, -2, 63,
    52, 53, 54, 55, 56, 57, 58, 59, 60, 61, -2, -2, -2, -2, -2, -2,
    -2,  0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14,
    15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, -2, -2, -2, -2, -2,
    -2, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40,
    41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, -2, -2, -2, -2, -2,
    -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2,
    -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2,
    -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2,
    -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2,
    -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2,
    -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2,
    -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2,
    -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2, -2
};

To Encode:

+ (NSString *)encodeBase64WithString:(NSString *)strData {
    return [QSStrings encodeBase64WithData:[strData dataUsingEncoding:NSUTF8StringEncoding]];
}

+ (NSString *)encodeBase64WithData:(NSData *)objData {
    const unsigned char * objRawData = [objData bytes];
    char * objPointer;
    char * strResult;

    // Get the Raw Data length and ensure we actually have data
    int intLength = [objData length];
    if (intLength == 0) return nil;

    // Setup the String-based Result placeholder and pointer within that placeholder
    strResult = (char *)calloc((((intLength + 2) / 3) * 4) + 1, sizeof(char));
    objPointer = strResult;

    // Iterate through everything
    while (intLength > 2) { // keep going until we have less than 24 bits
        *objPointer++ = _base64EncodingTable[objRawData[0] >> 2];
        *objPointer++ = _base64EncodingTable[((objRawData[0] & 0x03) << 4) + (objRawData[1] >> 4)];
        *objPointer++ = _base64EncodingTable[((objRawData[1] & 0x0f) << 2) + (objRawData[2] >> 6)];
        *objPointer++ = _base64EncodingTable[objRawData[2] & 0x3f];

        // we just handled 3 octets (24 bits) of data
        objRawData += 3;
        intLength -= 3; 
    }

    // now deal with the tail end of things
    if (intLength != 0) {
        *objPointer++ = _base64EncodingTable[objRawData[0] >> 2];
        if (intLength > 1) {
            *objPointer++ = _base64EncodingTable[((objRawData[0] & 0x03) << 4) + (objRawData[1] >> 4)];
            *objPointer++ = _base64EncodingTable[(objRawData[1] & 0x0f) << 2];
            *objPointer++ = '=';
        } else {
            *objPointer++ = _base64EncodingTable[(objRawData[0] & 0x03) << 4];
            *objPointer++ = '=';
            *objPointer++ = '=';
        }
    }

    // Terminate the string-based result
    *objPointer = '\0';

    // Create result NSString object
    NSString *base64String = [NSString stringWithCString:strResult encoding:NSASCIIStringEncoding];

    // Free memory
    free(strResult);

    return base64String;
}

To Decode:

+ (NSData *)decodeBase64WithString:(NSString *)strBase64 {
    const char *objPointer = [strBase64 cStringUsingEncoding:NSASCIIStringEncoding];
    size_t intLength = strlen(objPointer);
    int intCurrent;
    int i = 0, j = 0, k;

    unsigned char *objResult = calloc(intLength, sizeof(unsigned char));

    // Run through the whole string, converting as we go
    while ( ((intCurrent = *objPointer++) != '\0') && (intLength-- > 0) ) {
        if (intCurrent == '=') {
            if (*objPointer != '=' && ((i % 4) == 1)) {// || (intLength > 0)) {
                // the padding character is invalid at this point -- so this entire string is invalid
                free(objResult);
                return nil;
            }
            continue;
        }

        intCurrent = _base64DecodingTable[intCurrent];
        if (intCurrent == -1) {
            // we're at a whitespace -- simply skip over
            continue;
        } else if (intCurrent == -2) {
            // we're at an invalid character
            free(objResult);
            return nil;
        }

        switch (i % 4) {
            case 0:
                objResult[j] = intCurrent << 2;
                break;

            case 1:
                objResult[j++] |= intCurrent >> 4;
                objResult[j] = (intCurrent & 0x0f) << 4;
                break;

            case 2:
                objResult[j++] |= intCurrent >>2;
                objResult[j] = (intCurrent & 0x03) << 6;
                break;

            case 3:
                objResult[j++] |= intCurrent;
                break;
        }
        i++;
    }

    // mop things up if we ended on a boundary
    k = j;
    if (intCurrent == '=') {
        switch (i % 4) {
            case 1:
                // Invalid state
                free(objResult);
                return nil;

            case 2:
                k++;
                // flow through
            case 3:
                objResult[k] = 0;
        }
    }

    // Cleanup and setup the return NSData
    NSData * objData = [[[NSData alloc] initWithBytes:objResult length:j] autorelease];
    free(objResult);
    return objData;
}

At the time this question was originally 9 posted, people were understandably directing 8 you to third-party base 64 libraries because 7 of the lack of any native routines. But 6 iOS 7 introduced base 64 encoding routines (which actually simply 5 just exposes private methods iOS had going 4 back to iOS 4).

So, you can use the NSData method 3 base64EncodedStringWithOptions: to create a base-64 string from a NSData.

NSString *string = [data base64EncodedStringWithOptions:kNilOptions];

And 2 you can use initWithBase64EncodedString:options: to convert a base-64 string 1 back to a NSData:

NSData *data = [[NSData alloc] initWithBase64EncodedString:string options:kNilOptions]; 

Or, in Swift:

let string = data.base64EncodedString()

And

let data = Data(base64Encoded: string)

iOS includes built in support for base64 8 encoding and decoding. If you look at resolv.h you 7 should see the two functions b64_ntop and b64_pton . The 6 Square SocketRocket library provides a reasonable example 5 of how to use these functions from objective-c.

These 4 functions are pretty well tested and reliable 3 - unlike many of the implementations you 2 may find in random internet postings. Don't 1 forget to link against libresolv.dylib.

Since this seems to be the number one google 30 hit on base64 encoding and iphone, I felt 29 like sharing my experience with the code 28 snippet above.

It works, but it is extremely 27 slow. A benchmark on a random image (0.4 26 mb) took 37 seconds on native iphone. The 25 main reason is probably all the OOP magic 24 - single char NSStrings etc, which are only 23 autoreleased after the encoding is done.

Another 22 suggestion posted here (ab)uses the openssl 21 library, which feels like overkill as well.

The 20 code below takes 70 ms - that's a 500 times 19 speedup. This only does base64 encoding 18 (decoding will follow as soon as I encounter 17 it)

+ (NSString *) base64StringFromData: (NSData *)data length: (int)length {
int lentext = [data length]; 
if (lentext < 1) return @"";

char *outbuf = malloc(lentext*4/3+4); // add 4 to be sure

if ( !outbuf ) return nil;

const unsigned char *raw = [data bytes];

int inp = 0;
int outp = 0;
int do_now = lentext - (lentext%3);

for ( outp = 0, inp = 0; inp < do_now; inp += 3 )
{
    outbuf[outp++] = base64EncodingTable[(raw[inp] & 0xFC) >> 2];
    outbuf[outp++] = base64EncodingTable[((raw[inp] & 0x03) << 4) | ((raw[inp+1] & 0xF0) >> 4)];
    outbuf[outp++] = base64EncodingTable[((raw[inp+1] & 0x0F) << 2) | ((raw[inp+2] & 0xC0) >> 6)];
    outbuf[outp++] = base64EncodingTable[raw[inp+2] & 0x3F];
}

if ( do_now < lentext )
{
    char tmpbuf[2] = {0,0};
    int left = lentext%3;
    for ( int i=0; i < left; i++ )
    {
        tmpbuf[i] = raw[do_now+i];
    }
    raw = tmpbuf;
    outbuf[outp++] = base64EncodingTable[(raw[inp] & 0xFC) >> 2];
    outbuf[outp++] = base64EncodingTable[((raw[inp] & 0x03) << 4) | ((raw[inp+1] & 0xF0) >> 4)];
    if ( left == 2 ) outbuf[outp++] = base64EncodingTable[((raw[inp+1] & 0x0F) << 2) | ((raw[inp+2] & 0xC0) >> 6)];
}

NSString *ret = [[[NSString alloc] initWithBytes:outbuf length:outp encoding:NSASCIIStringEncoding] autorelease];
free(outbuf);

return ret;
}

I left out the line-cutting since I didn't 16 need it, but it's trivial to add.

For those 15 who are interested in optimizing: the goal 14 is to minimize what happens in the main 13 loop. Therefore all logic to deal with the 12 last 3 bytes is treated outside the loop.

Also, try 11 to work on data in-place, without additional 10 copying to/from buffers. And reduce any 9 arithmetic to the bare minimum.

Observe that 8 the bits that are put together to look up 7 an entry in the table, would not overlap 6 when they were to be orred together without 5 shifting. A major improvement could therefore 4 be to use 4 separate 256 byte lookup tables 3 and eliminate the shifts, like this:

outbuf[outp++] = base64EncodingTable1[(raw[inp] & 0xFC)];
outbuf[outp++] = base64EncodingTable2[(raw[inp] & 0x03) | (raw[inp+1] & 0xF0)];
outbuf[outp++] = base64EncodingTable3[(raw[inp+1] & 0x0F) | (raw[inp+2] & 0xC0)];
outbuf[outp++] = base64EncodingTable4[raw[inp+2] & 0x3F];

Of course 2 you could take it a whole lot further, but 1 that's beyond the scope here.

In mvds's excellent improvement, there are 1 two problems. Change code to this:

raw = tmpbuf;
inp = 0;
outbuf[outp++] = base64EncodingTable[(raw[inp] & 0xFC) >> 2];
outbuf[outp++] = base64EncodingTable[((raw[inp] & 0x03) << 4) | ((raw[inp+1] & 0xF0) >> 4)];
if ( left == 2 ) outbuf[outp++] = base64EncodingTable[((raw[inp+1] & 0x0F) << 2) | ((raw[inp+2] & 0xC0) >> 6)];
else outbuf[outp++] = '=';
outbuf[outp++] = '=';

Better solution :

There is a built in function 1 in NSData

[data base64Encoding]; //iOS < 7.0
[data base64EncodedStringWithOptions:NSDataBase64Encoding76CharacterLineLength]; //iOS >= 7.0

Glad people liked it. The end-game was a 11 little flawed I must admit. Besides rightly 10 setting inp=0 you should either also increase 9 tmpbuf's size to 3, like

unsigned char tmpbuf[3] = {0,0,0};

or leave out the orring 8 of raw[inp+2]; if we would have a raw[inp+2] != 0 7 for this chunk we would still be in the 6 loop of course...

Either way works, you might 5 consider keeping the final table lookup 4 block identical to the one in the loop for 3 clarity. In the final version I used I did

while ( outp%4 ) outbuf[outp++] = '=';

To 2 add the ==

Sorry I didn't check RFC's and 1 stuff, should have done a better job!

Under iOS8 and later use - (NSString *)base64EncodedStringWithOptions:(NSDataBase64EncodingOptions)options of NSData

0

#import "NSDataAdditions.h"
@implementation NSData (NSDataAdditions)

+ (NSData *) base64DataFromString: (NSString *)string {
  unsigned long ixtext, lentext;
  unsigned char ch, input[4], output[3];
  short i, ixinput;
  Boolean flignore, flendtext = false;
  const char *temporary;
  NSMutableData *result;

  if (!string)
    return [NSData data];

  ixtext = 0;
  temporary = [string UTF8String];
  lentext = [string length];
  result = [NSMutableData dataWithCapacity: lentext];
  ixinput = 0;

  while (true) {
    if (ixtext >= lentext)
      break;
    ch = temporary[ixtext++];
    flignore = false;

    if ((ch >= 'A') && (ch <= 'Z'))
      ch = ch - 'A';
    else if ((ch >= 'a') && (ch <= 'z'))
      ch = ch - 'a' + 26;
    else if ((ch >= '0') && (ch <= '9'))
      ch = ch - '0' + 52;
    else if (ch == '+')
      ch = 62;
    else if (ch == '=')
      flendtext = true;
    else if (ch == '/')
      ch = 63;
    else
      flignore = true;

    if (!flignore) {
      short ctcharsinput = 3;
      Boolean flbreak = false;

      if (flendtext) {
         if (ixinput == 0)
           break;              
         if ((ixinput == 1) || (ixinput == 2))
           ctcharsinput = 1;
         else
           ctcharsinput = 2;
         ixinput = 3;
         flbreak = true;
      }

      input[ixinput++] = ch;

      if (ixinput == 4){
        ixinput = 0;
        output[0] = (input[0] << 2) | ((input[1] & 0x30) >> 4);
        output[1] = ((input[1] & 0x0F) << 4) | ((input[2] & 0x3C) >> 2);
        output[2] = ((input[2] & 0x03) << 6) | (input[3] & 0x3F);
        for (i = 0; i < ctcharsinput; i++)
        [result appendBytes: &output[i] length: 1];
      }
    if (flbreak)
      break;
    }
  }
  return result;
}
@end

0

For an update to use the NSData (NSDataBase64Encoding) category methods 1 in iOS7 see my answer here: https://stackoverflow.com/a/18927627/1602729

Here's a compact Objective-C version as 6 a Category on NSData. It takes some thinking 5 about...

@implementation NSData (DataUtils)

static char base64[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";

- (NSString *)newStringInBase64FromData
{
 NSMutableString *dest = [[NSMutableString alloc] initWithString:@""];
 unsigned char * working = (unsigned char *)[self bytes];
 int srcLen = [self length];

 // tackle the source in 3's as conveniently 4 Base64 nibbles fit into 3 bytes
 for (int i=0; i<srcLen; i += 3)
 {
  // for each output nibble
  for (int nib=0; nib<4; nib++)
  {
   // nibble:nib from char:byt
   int byt = (nib == 0)?0:nib-1;
   int ix = (nib+1)*2;

   if (i+byt >= srcLen) break;

   // extract the top bits of the nibble, if valid
   unsigned char curr = ((working[i+byt] << (8-ix)) & 0x3F);

   // extract the bottom bits of the nibble, if valid
   if (i+nib < srcLen) curr |= ((working[i+nib] >> ix) & 0x3F);

   [dest appendFormat:@"%c", base64[curr]];
  }
 }

 return dest;
}

@end

Padding can be added if required 4 by making the scope of 'byt' wider and appending 3 'dest' with (2-byt) "=" characters before 2 returning.

A Category can then be added to 1 NSString, thus:

@implementation NSString (StringUtils)

- (NSString *)newStringInBase64FromString
{
 NSData *theData = [NSData dataWithBytes:[self UTF8String] length:[self length]]; 

 return [theData newStringInBase64FromData];
}

@end

iOS has had built-in Base64 encoding and 5 decoding methods (without using libresolv) since 4 iOS 4. However, it was only declared in 3 the iOS 7 SDK. Apple documentation states 2 that you can use it when targeting iOS 4 1 and above.

NSData *myData = ... some data
NSString *base64String = [myData base64Encoding];
NSData *decodedData = [[NSData alloc] initWithBase64Encoding:base64String];

Here is an example to convert an NSData 3 object to Base 64. It also shows how to 2 go the other way (decode a base 64 encoded 1 NSData object):

NSData *dataTake2 = 
  [@"iOS Developer Tips" dataUsingEncoding:NSUTF8StringEncoding];

// Convert to Base64 data
NSData *base64Data = [dataTake2 base64EncodedDataWithOptions:0];

// Do something with the data...

// Now convert back from Base64
NSData *nsdataDecoded = [base64Data initWithBase64EncodedData:base64Data options:0];

in iOS 7

        NSData *data=[[NSData alloc]init];
        [data base64Encoding];

0

I have done it using the following class..

@implementation Base64Converter
static char base64EncodingTable[64] = {
'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L',  'M', 'N', 'O', 'P',
'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v',
'w', 'x', 'y', 'z', '0', '1', '2', '3', '4', '5', '6', '7',    '8', '9', '+', '/'
};
+ (NSString *) base64StringFromData: (NSData *)data length: (int)length {

unsigned long ixtext, lentext;

long ctremaining;

unsigned char input[3], output[4];

short i, charsonline = 0, ctcopy;

const unsigned char *raw;

NSMutableString *result;

lentext = [data length];

if (lentext < 1)
    return @"";

result = [NSMutableString stringWithCapacity: lentext];

raw = [data bytes];

ixtext = 0;

while (true) {

    ctremaining = lentext - ixtext;

    if (ctremaining <= 0)
        break;

    for (i = 0; i < 3; i++) {
        unsigned long ix = ixtext + i;
        if (ix < lentext)
            input[i] = raw[ix];
        else
            input[i] = 0;
    }

    output[0] = (input[0] & 0xFC) >> 2;

    output[1] = ((input[0] & 0x03) << 4) | ((input[1] & 0xF0) >> 4);

    output[2] = ((input[1] & 0x0F) << 2) | ((input[2] & 0xC0) >> 6);

    output[3] = input[2] & 0x3F;

    ctcopy = 4;

    switch (ctremaining) {
        case 1:
            ctcopy = 2;
            break;

        case 2:
            ctcopy = 3;
            break;
    }

    for (i = 0; i < ctcopy; i++)
        [result appendString: [NSString stringWithFormat: @"%c", base64EncodingTable[output[i]]]];

    for (i = ctcopy; i < 4; i++)
        [result appendString: @"="];

    ixtext += 3;

    charsonline += 4;

    if ((length > 0) && (charsonline >= length))
        charsonline = 0;
}
return result;
}
@end

While 1 calling call

 [Base64Converter base64StringFromData:dataval length:lengthval];

That's it...

I Think This will be helpful

 + (NSString *)toBase64String:(NSString *)string {
    NSData *data = [string dataUsingEncoding: NSUnicodeStringEncoding];

    NSString *ret = [data base64EncodedStringWithOptions:NSDataBase64Encoding64CharacterLineLength];

    return ret;
    }

    + (NSString *)fromBase64String:(NSString *)string {
NSData *aData = [string dataUsingEncoding:NSUTF8StringEncoding];
NSData *aDataDecoded = [[NSData alloc]initWithBase64EncodedString:string options:0];
NSString *decryptedStr = [[NSString alloc]initWithData:aDataDecoded encoding:NSUTF8StringEncoding];

return [decryptedStr autorelease];

}

0

Download Base64

Do following code to convert an 1 image to base64

NSString *base64String=[UIImagePNGRepresentation(image) base64Encoding];

As per your requirement i have created a 4 sample demo using Swift 4 in which you can encode/decode 3 string and image as per your requirement.

• I 2 have also added sample methods of relevant 1 operations.

  //
  //  Base64VC.swift
  //  SOF_SortArrayOfCustomObject
  //
  //  Created by Test User on 09/01/18.
  //  Copyright © 2018 Test User. All rights reserved.
  //
  
  import UIKit
  import Foundation
  
  class Base64VC: NSObject {
  
      //----------------------------------------------------------------
      // MARK:-
      // MARK:- String to Base64 Encode Methods
      //----------------------------------------------------------------
  
      func sampleStringEncodingAndDecoding() {
          if let base64String = self.base64Encode(string: "TestString") {
              print("Base64 Encoded String: \n\(base64String)")
              if let originalString = self.base64Decode(base64String: base64String) {
                  print("Base64 Decoded String: \n\(originalString)")
              }
          }
      }
  
  
      //----------------------------------------------------------------
  
      func base64Encode(string: String) -> String? {
          if let stringData = string.data(using: .utf8) {
              return stringData.base64EncodedString()
          }
          return nil
      }
  
      //----------------------------------------------------------------
  
      func base64Decode(base64String: String) -> String? {
          if let base64Data = Data(base64Encoded: base64String) {
              return String(data: base64Data, encoding: .utf8)
          }
          return nil
      }
  
  
      //----------------------------------------------------------------
      // MARK:-
      // MARK:- Image to Base64 Encode  Methods
      //----------------------------------------------------------------
  
      func sampleImageEncodingAndDecoding() {
          if let base64ImageString = self.base64Encode(image: UIImage.init(named: "yourImageName")!) {
              print("Base64 Encoded Image: \n\(base64ImageString)")
              if let originaImage = self.base64Decode(base64ImageString: base64ImageString) {
                  print("originalImageData \n\(originaImage)")
              }
          }
      }
  
      //----------------------------------------------------------------
  
      func base64Encode(image: UIImage) -> String? {
          if let imageData = UIImagePNGRepresentation(image) {
              return imageData.base64EncodedString()
          }
          return nil
      }
  
      //----------------------------------------------------------------
  
      func base64Decode(base64ImageString: String) -> UIImage? {
          if let base64Data = Data(base64Encoded: base64ImageString) {
              return UIImage(data: base64Data)!
          }
          return nil
      }
  
  
  }